Custom Auto Wind Tower Production Line High Efficient VFD Control

Quick Detail:

The 2+2 growing line concept is designed for large diameter tubular workpieces that have high moments of inertia. so that it can be supported on just two points without suffering excessive deflection. Typical application would be for a wind tower.

Description:

This can be viewed as a conventional idler roll on a non-motorize travel car except that it has the feature of being able to pop up each roller with a stroke of 110mm (max) via a hydraulic cylinder. In addition, the travel car is mounted offset to the centerline of the skid. During installation the protruding side of the travel car carriage should face away from the line up so that the fit up can move closer to the line up.

Applications:

This is a floor mounted unit that allows the entire unit to move longitudinally with a stroke of 300mm longitudinal travel) on its own rail base. The upper body is fitted with an elevating table with a stroke of 160mm.

On the table are the following:

i. 4 x independent steel rollers that have a up-stroke of 130mm

ii. A pair of cylindrical rollers arranged in a V-configuration

iii. The cylindrical rollers are used for facilitating the conveying of the pipe after line-up has been

completed. The 4-independent steel rollers are used for line-up purposes. The height of the steel

roller is lower than the v-cylindrical roller when fully collapsed thus allowing conveying to commence

Specifications:

Competitive Advantage:

● Inverter and Main electric elements are Siemens/Schneider or equal brand.

● Motor is UK brand Invertek.

● VFD rotary speed control, improving the reliability of operation.

● Steel or PU roller which can ensure a long time using (at least 2 years).

● With lubrication system.

● Accept testing before delivery.

● Accept special design and custom.

Ronniewell established since 2007 .We have built our expertise through years of experience. This enables us to produce equipment suitable for almost the entire spectrum of industrial welding and cutting needs.

Ronniewell's range of activities includes consultation, design, manufacture, install and provision of services mainly to Oil & Gas Installations, Constructors and Heavy Engineering and Steel Structure Fabricators.

Comprehensive range for sale:

• CNC flame/plasma cutting machine;
• Welding Rotators, Welding Turning Rolls;
• Welding Positioners & Welding Head and tail stocks;
• Welding Column & Boom Manipulators;
• Horizontal turntables;
• Welding Fit Up rotator & Growing Lines;
• Specialist handling welding rotators & welding positioners for Riser Lines, Pipe Shops, Pile Racks, Double Jointing, and Wind tower Production solutions.
• H-beam production lines;
• Edge milling machine.

Our vision is based on a long term strategy. This means that we are increasing our design and production capacity and we are strengthening our sales and after sales team to be able to serve you in the best possible way.